Go to homepage
€0.00
M RCK
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit
M Race Calibration Kit

M Race Calibration Kit

M Race Calibration Kit, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), kit electronics by BMW Motorrad Motorsport, incl. hard- and software

€6,664.00

Price incl. VAT plus shipping costs

Product number: 1361HP067A01
on request
The M RCK contains:
- Race ECU (Bosch BMSM2)
- Race Wiring loom (engine and chassis loom separated)
- Motec C125 Dashboard (includes datalogger)
- Race handlebar switches (left and right)
- Motec Datalogging software I2 Standard

The kit provides full WSBK level electronics for the BMW S 1000 RR (K67), improving all electronic systems (Traction Control, Engine Brake Control, Wheelie Control and Launch Control). The kit also enables the use of the split throttle bodies found on the S 1000 RR, giving a very smooth throttle response under lean angle. All torque reduction is done over ignition, making all rider aiding systems audible to the rider.

Throttle connection/Power modes
The user can calibrate the ECU for 64 different power modes, limiting torque in specific gears to adapt to track conditions/rider preference.

Engine Brake Control
The ECU now operates the Engine Brake in closed loop, constantly monitoring the negative rear wheel slip for optimal performance. The user can configure 10 different Engine Brake curves, and adjust them per gear and per riding mode. Rider can adjust the EB during ride in 15 steps.

Traction Control
Torque reduction is done over ignition instead of throttle, providing excellent feedback to the rider. Traction Control now works with adjustable slip targets for optimal performance. Slip targets can be set per gear and per riding mode. Rider can adjust the DTC during ride in 15 steps.

Wheelie Control
Wheelie control is adjustable per gear and per riding mode, pitch angle control is done over ignition cut.

Air/Fuel
Fueling is done completely under closed loop, always configured for maximum engine power. Fuel table is now configurable with lambda targets (instead of injection correction on the former RCK Pro)

Other features:
- No immobilizer
- Dashboard and ECU can be replaced at any moment
- ABS and DDC can be removed from the motorcycle
- Rain light switches on automatically when rain mode is engaged
- Sensors (suspension/brake pressure) can be zero-d with a button combination

------------------------------
Please note:
- We highly recommend to use the E-throttle kit SBK (see Accessories tab).
- We recommend to use the aluminium protective housing (see Accessories tab).
------------------------------

Weight: 4,500 kg

Delivery Scope

- Race ECU (Bosch BMSM2)
- Race Wiring loom (engine and chassis loom separated)
- Motec C125 Dashboard (includes datalogger)
- Race handlebar switches (left and right)
- Motec Datalogging software I2 Standard
- USB connecting cable


Note

- ABS system needs to be removed
- SAS system needs to be removed
- DDC suspension must be changed to a conventional setup
- OEM exhaust must be replaced by a racing exhaust system

ManufacturerModelTypeModel YearVariantCapacity
alpha RacingRC-STK-MK662023 - RCM23999
alpha RacingRC-STK-MK662021 - 2022RCM21999
alpha RacingRC-STK-SK672019 - 2022RCS19999
alpha RacingRC-STK-SK672023 - RCS23999
BMWM 1000 RRK662023 - 0P01999
BMWM 1000 RRK662021 - 20220E71999
BMWS 1000 RRK672019 - 20220E21999
BMWS 1000 RRK672023 - 0E61999
E-throttle kit SBK
E-throttle kit SBK, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), aluminium housing, for M Race Calibration Kit
6131B002A00
€415.00
Protective housing MoTeC C125
Protective housing for MoTeC C125 dashboard, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66)
61DA00102
€429.00
M Race Calibration Kit Interface Module
M Race Calibration Kit Interface Module, BMW S 1000 RR 2019- (K67) and BMW M 1000 RR 2021- (K66)
7753B001A00
€499.00
Enet interface cable, Ethernet -> OBD2
Enet interface cable, Ethernet to OBD2, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for programming the MoTeC C125 dashboard, only in combination with M RCK
6111B100A00
€42.00
Dashboard and fairing carrier, MoTeC dashboard
Dashboard and fairing carrier for MoTeC C125 dashboard, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021-2022 (K66), aluminium
4663DA00804
€429.00
Dashboard and fairing carrier, MoTeC dashboard
Dashboard and fairing carrier for MoTeC C125 dashboard, BMW M 1000 RR 2023- (K66), aluminium
4663B026A00
€449.00
MoTeC GPS antenna, for M RCK
MoTeC GPS antenna GPS-L10, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), only in combination with BMW M Race Calibration Kit
7470B003A00
€290.00
Retainer kit race wiring loom
Retainer kit race wiring loom, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for mounting the M Race Calibration Kit wiring harness
61DA00200
€152.00
Plug kit throttle valve body
Plug kit throttle valve body, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to close the activated carbon filter connectors on the throttle valve body, in combination with M Race Calibration Kit
6113B005A00
€25.00
Intake plug kit airbox
Intake plug kit airbox, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66)
1371B001B00
€59.50
Cover kit SAS
Cover kit SAS, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), when SAS valve is removed, for valve cover
1172B001A00
€80.50
Cover SAS - airbox
Cover secondary air system - airbox, if SAS valve is removed
1173B001A00
€53.50
USB 3.1 Flash Drive 16GB
USB 3.1 Flash Drive 16GB, SanDisk Cruzer Ultra Fit, to be used with MoTeC C125 dashboard
8179A007A00
€19.69
Rain light kit SBK
Rain light kit SBK, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to be fitted to the racing subframe
4651DA00220
€185.00
Rain light switch M RCK
Rain light switch M Race Calibration Kit, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66)
6314B100A00
€59.00
Lambda sensor kit Motorsport
Lambda sensor kit Motorsport, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), reinforced version
1178B002A00
€267.75
Wiring loom upgrade oil pressure and temperature
Wiring loom upgrade for monitoring pressure and temperature in the oil circuit, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), upgrade for BMW M RCK wiring loom
7470B023A00
€869.00
2D front suspension sensor 150 mm
2D front suspension sensor 150 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer slim body, for M Race Calibration Kit
7470HP001A00
€392.70
2D Front suspension sensor 175 mm
2D Front suspension sensor 175 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer, for M RCK
7470HP004A00
€452.20
2D rear suspension sensor 75 mm
2D rear suspension sensor 75 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer slim body, for M RCK
7470HP002A00
€392.70
2D rear suspension sensor 100 mm
2D rear suspension sensor 100 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer, for M Race Calibration Kit
7470HP005A00
€392.70
2D Front brake pressure sensor
2D Front brake pressure sensor, pressure range 0-100bar (1450psi), for M RCK and RCK Pro-STK
7470HP008A00
€523.60
2D Rear brake pressure sensor
2D Rear brake pressure sensor, pressure range 0-100bar (1450psi), for M RCK and RCK Pro-STK
7470HP009A00
€523.60
Tire Monitoring System, M RCK
Tire Monitoring System, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit wiring loom
6111B055A00
€2,175.00
Switch unit right on throttle, for M RCK
Switch unit right, for assembly with E-throttle kit SBK, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit, spare part
6111B050A00
€375.00
Switch unit left 5 button, for M RCK
Handlebar switch unit left, 5 buttons, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit, spare part
6131A019B00
€339.00
Switch unit left 5 button, compact version
Handlebar switch unit left, 5 buttons, compact version, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit, spare part
6111B054A00
€429.00
Switch unit right 3 buttons, for M RCK
Switch unit right 3 buttons, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), fits to BMW M Race Calibration Kit (K67), spare part
6131A191B00
€310.00
HEX GS-911wifi OBD II Adapter
HEX OBD II adapter cable for 10-pin GS-911, for bikes from model year 2017 with EURO 4 standard
7753A002A00
€52.00
MoTeC Pro License, C125 dashboard
MoTeC i2 Pro License extension, for C125 dashboard, Unlimited License
7470B010A00
€1,053.15
Open MoTeC Standard Log Files, PC license
MoTeC i2 Pro Feature License, allows individual PC to open any MoTeC log file in i2 Pro, 1 year license
7470B010B00
€892.50

You might also like

MoTeC Pro License, C125 dashboard
MoTeC Pro License, C125 dashboard
7470B010A00
available

€1,053.15

Open MoTeC Standard Log Files, PC license
Open MoTeC Standard Log Files, PC license
7470B010B00
available

€892.50

Zuletzt angesehene Artikel

For better performance, the use of social media and for advertising purposes, we recommend accepting cookies. Social media functions and advertising tailored specifically to you are only possible with the respective cookies. For more information on this or to change your settings, click on the "Configure" button or go to the "Cookie settings" at the bottom of the website. If you opt out of tracking, we will only use cookies that are necessary for the basic functionality of our website. You will find detailed information in our Privacy and Cookie Policy