M RCK
M Race Calibration Kit, M RR 2025-
M Race Calibration Kit, BMW M 1000 RR 2025- (K66), Kit-electronics by BMW Motorrad Motorsport, incl. hard- and software
€6,902.00
Product number:
1361HP066A00
With the purposefully developed electronic performance packages, it is possible to manage every challenge out on the track. The complete plug-and play kit system offers individual configurations for traction control, wheelie control, engine brake, and much more, as well as safety through alarms and diagnostic options.
The kit provides full World Championship level electronics for the M 1000 RR (K66), improving all electronic systems (Traction Control, Engine Brake Control, Wheelie Control and Launch Control). All torque reduction is done over ignition, making all rider aiding systems audible to the rider.
Throttle connection/Power modes
The user can calibrate the ECU for 64 different power modes, limiting torque in specific gears to adapt to track conditions/rider preference.
Engine Brake Control
The ECU now operates the Engine Brake in closed loop, constantly monitoring the negative rear wheel slip for optimal performance. The user can configure 10 different Engine Brake curves, and adjust them per gear and per riding mode. Rider can adjust the EB during ride in 15 steps.
Traction Control
Torque reduction is done over ignition instead of throttle, providing excellent feedback to the rider. Traction Control now works with adjustable slip targets for optimal performance. Slip targets can be set per gear and per riding mode. Rider can adjust the DTC during ride in 15 steps.
Wheelie Control
Wheelie control is adjustable per gear and per riding mode, pitch angle control is done over ignition cut.
Air/Fuel
Fueling is done completely under closed loop, always configured for maximum engine power. Fuel table is now configurable with lambda targets.
Other features:
Pressure and temperature sensor for the oil circuit included
Dashboard and ECU can be replaced at any moment
ABS and DDC can be removed
Rain light switches on automatically when rain mode is engaged
Sensors (suspension/brake pressure) can be zero-d with a button combination
Weight: 4.600 kg
The kit provides full World Championship level electronics for the M 1000 RR (K66), improving all electronic systems (Traction Control, Engine Brake Control, Wheelie Control and Launch Control). All torque reduction is done over ignition, making all rider aiding systems audible to the rider.
Throttle connection/Power modes
The user can calibrate the ECU for 64 different power modes, limiting torque in specific gears to adapt to track conditions/rider preference.
Engine Brake Control
The ECU now operates the Engine Brake in closed loop, constantly monitoring the negative rear wheel slip for optimal performance. The user can configure 10 different Engine Brake curves, and adjust them per gear and per riding mode. Rider can adjust the EB during ride in 15 steps.
Traction Control
Torque reduction is done over ignition instead of throttle, providing excellent feedback to the rider. Traction Control now works with adjustable slip targets for optimal performance. Slip targets can be set per gear and per riding mode. Rider can adjust the DTC during ride in 15 steps.
Wheelie Control
Wheelie control is adjustable per gear and per riding mode, pitch angle control is done over ignition cut.
Air/Fuel
Fueling is done completely under closed loop, always configured for maximum engine power. Fuel table is now configurable with lambda targets.
Other features:
Pressure and temperature sensor for the oil circuit included
Dashboard and ECU can be replaced at any moment
ABS and DDC can be removed
Rain light switches on automatically when rain mode is engaged
Sensors (suspension/brake pressure) can be zero-d with a button combination
Weight: 4.600 kg
Delivery Scope
Engine control unit
Motorsport Wiring loom (engine and chassis loom separated)
Motec C125 Dashboard (includes datalogger)
Race handlebar switches (left/right)
Motec Datalogging software I2 Standard
USB connecting cable
Note
ABS system needs to be removed.
SAS system needs to be removed.
DDC suspension must be changed to a conventional setup.
OEM exhaust must be replaced by a racing exhaust system.
We highly recommend to use the E-throttle kit (see Accessories).
We recommend to use the aluminium protective housing (see Accessories).
| Manufacturer | Model | Type | Model Year | Variant | Capacity |
|---|---|---|---|---|---|
| BMW | M 1000 RR | K66 | 2025 - | 0P41 | 999 |
E-throttle kit SBK, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), aluminium housing, for M Race Calibration Kit
6131B002A00
€415.00
Protective housing for MoTeC C125 dashboard, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66)
61DA00102
€429.00
M Race Calibration Kit Interface Module, BMW S 1000 RR 2019- (K67) and BMW M 1000 RR 2021- (K66)
7753B001A00
€499.00
Enet interface cable, Ethernet to OBD2, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for programming the MoTeC C125 dashboard, only in combination with M RCK
6111B100A00
€42.00
MoTeC GPS antenna GPS-L10, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), only in combination with BMW M Race Calibration Kit
7470B003A00
€290.00
Plug kit throttle valve body, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to close the activated carbon filter connectors on the throttle valve body, in combination with M Race Calibration Kit
6113B005A00
€25.00
Cover kit SAS, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), when SAS valve is removed, for valve cover
1172B001A00
€80.50
USB 3.1 Flash Drive 16GB, SanDisk Cruzer Ultra Fit, to be used with MoTeC C125 dashboard
8179A007A00
€19.69
Rain light kit SBK, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to be fitted to the racing subframe
4651DA00220
€185.00
Rain light switch M Race Calibration Kit, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66)
6314B100A00
€59.00
2D front suspension sensor 150 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer slim body, for M Race Calibration Kit
7470HP001A00
€392.70
2D Front suspension sensor 175 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer, for M RCK
7470HP004A00
€452.20
2D Rear suspension sensor 75 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer slim body, for M RCK
7470HP002A00
€392.70
2D rear suspension sensor 100 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer, for M Race Calibration Kit
7470HP005A00
€392.70
2D Rear brake pressure sensor, pressure range 0-100bar (1450psi), for M RCK and RCK Pro-STK
7470HP009A00
€523.60
2D Front brake pressure sensor, pressure range 0-100bar (1450psi), for M RCK and RCK Pro-STK
7470HP008A00
€523.60
Tire Monitoring System, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit wiring loom
6111B055A00
€2,175.00
Switch unit right, for assembly with E-throttle kit SBK, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit, spare part
6111B050A00
€375.00
Handlebar switch unit left, 5 buttons, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit, spare part
6131A019B00
€339.00
Handlebar switch unit left, 5 buttons, compact version, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit, spare part
6111B054A00
€429.00
Switch unit right 3 buttons, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), fits to BMW M Race Calibration Kit, spare part
6131A191B00
€310.00
Safety ignition switch ON/OFF, spare part for M Race Calibration Kit
6131B100A00
€105.00
HEX OBD II adapter cable for 10-pin GS-911, for bikes from model year 2017 with EURO 4 standard
7753A002A00
€52.00
MoTeC i2 PRO ANALYSIS , for C125 dashboard, Unlimited License
7470B010A00
€1,053.15
MoTeC i2 Pro Feature License, allows individual PC to open any MoTeC log file in i2 Pro, 1 year license
7470B010B00
€892.50
-
Accessories
E-throttle kit SBK, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), aluminium housing, for M Race Calibration Kit6131B002A00€415.00
Protective housing for MoTeC C125 dashboard, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66)61DA00102€429.00
M Race Calibration Kit Interface Module, BMW S 1000 RR 2019- (K67) and BMW M 1000 RR 2021- (K66)7753B001A00€499.00
Enet interface cable, Ethernet to OBD2, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for programming the MoTeC C125 dashboard, only in combination with M RCK6111B100A00€42.00
MoTeC GPS antenna GPS-L10, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), only in combination with BMW M Race Calibration Kit7470B003A00€290.00
Plug kit throttle valve body, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to close the activated carbon filter connectors on the throttle valve body, in combination with M Race Calibration Kit6113B005A00€25.00
Cover kit SAS, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), when SAS valve is removed, for valve cover1172B001A00€80.50
USB 3.1 Flash Drive 16GB, SanDisk Cruzer Ultra Fit, to be used with MoTeC C125 dashboard8179A007A00€19.69
Rain light kit SBK, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), to be fitted to the racing subframe4651DA00220€185.00
Rain light switch M Race Calibration Kit, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66)6314B100A00€59.00
2D front suspension sensor 150 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer slim body, for M Race Calibration Kit7470HP001A00€392.70
2D Front suspension sensor 175 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer, for M RCK7470HP004A00€452.20
2D Rear suspension sensor 75 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer slim body, for M RCK7470HP002A00€392.70
2D rear suspension sensor 100 mm, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer, for M Race Calibration Kit7470HP005A00€392.70
2D Rear brake pressure sensor, pressure range 0-100bar (1450psi), for M RCK and RCK Pro-STK7470HP009A00€523.60
2D Front brake pressure sensor, pressure range 0-100bar (1450psi), for M RCK and RCK Pro-STK7470HP008A00€523.60
Tire Monitoring System, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit wiring loom6111B055A00€2,175.00
Switch unit right, for assembly with E-throttle kit SBK, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit, spare part6111B050A00€375.00
Handlebar switch unit left, 5 buttons, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit, spare part6131A019B00€339.00
Handlebar switch unit left, 5 buttons, compact version, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for M Race Calibration Kit, spare part6111B054A00€429.00
Switch unit right 3 buttons, BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), fits to BMW M Race Calibration Kit, spare part6131A191B00€310.00
Safety ignition switch ON/OFF, spare part for M Race Calibration Kit6131B100A00€105.00
HEX OBD II adapter cable for 10-pin GS-911, for bikes from model year 2017 with EURO 4 standard7753A002A00€52.00
MoTeC i2 PRO ANALYSIS , for C125 dashboard, Unlimited License7470B010A00€1,053.15
MoTeC i2 Pro Feature License, allows individual PC to open any MoTeC log file in i2 Pro, 1 year license7470B010B00€892.50